Diario de buceoLugares en los que he buceado
- Número total de inmersiones NO en diveboard:
Este número se añade al número total de buceos registrados en Diveboard (público + privado) para así obtener el "Número Total de inmersiones". - Inmersiones publicadas:5
- Inmersiones totales:5
- Inmersiones este año:0
- Tiempo total bajo el agua en Diveboard:2hrs 56 min
- La mayoría de las inmersiones en Diveboard en:
Australia - Inmersión más profunda:
20.4m en Gold Coast, Australia - Inmersión más larga:
48 min en Port Phillip Bay,Australia - Fotos en el diario:4
- Número de especies avistadas:0
Fotos favoritas
Especies avistadas
Datos proporcionados por EOL.org
BFeed de usuario
Inmersiones y posts de Chris rRSS feed
Inmersiones favoritas
-
2020-12-11 Australia Gold Coast
Wreck Of The Scottish PrinceBuddy: Maddie Dive Center: GC Dive Adventures Wildlife: • I saw a cool pufferfish with one eye • We found the bull ray again • A couple of small moray eels • Lots of wobbegongs The vis was a bit pea-soupy but not enough to ruin the dive
-
2020-12-10 Australia Gold Coast
Palm Beach ReefBuddy: Maddie Dive Center: GC Dive Adventures Very calm, glassy seas. Lots of coral cover, but not so many fish. Wildlife: • Some sort of small skate or stingray • A couple of scorpionfish • Some small nudis Skills: • Practiced DSMB deployment. All went well. I learned that when you disconnect your LP hose underwater, you need to push it in to counteract the pressure, while pulling back on the collar.
-
2020-12-11 Australia Gold Coast
Gretas ReefBuddy: Maddie DC: GC Dive Adventures The vis was 2-3m and the water was freezing. About 5 minutes after descent, Maddie and I decided to thumb the dive due to the cold, and do a free ascent using my DSMB. The ascent went well and was very cool, although I went up much slower than I could have. As a result we ended up drifting a long way from the boat, which lead to an exhausting surface swim in rough seas.
-
2020-12-03 Australia Port Phillip Bay
Blairgowrie PierWeighting: Weighting and trim were good initially. As I used up air, I got a little floaty, so Jo added 1kg trim weights. I ended up with severe head-down trim after that. Next time, try 7 or 8kg integrated and no trim weights. Skills: I practiced mask clearing 4 times: 2 half-flooded and 2 fully removed. In retrospect, I should have practiced more. While I'm fairly confident I could replace my mask at depth, I'm not confident I could maintain neutral bouyancy while doing so. I practiced reg recovery with two methods: arm sweep and hose tracing. I found out that my primary reg's hose is plugged in behind my alternate reg's hose. I practiced DSMB inflation with both open-bottomed and LP hose inflated DSMBs. I learned that a snap bolt is often used to thread the line back onto the reel. I learned that the LP hose inflated ones really take off like a rocket as soon as you plug them in, so you'd better be ready for it. I learned that the open-bottomed ones can be inflated using breathing exhaust or using the purge button. I learned that they don't have to be inflated all the way, since the gas will expand as it ascends. Other notes: I learned that you should test the regulators' diaphragms for leaks/sticking before pressurising the system. I also learned that if you have a long primary hose, you should tuck the loop under your cumberbund.
Estamos participando en el concurso de startups Techcrunch Disrupt. Apoya Diveboard votando por nosotros!
